Check and select Windows XP (Service Pack 3) . Click Apply , then OK .
The USB Wave 54 is a compact wireless LAN USB adapter based on the 802.11g standard, capable of speeds up to 54 Mbps. The original product documentation lists compatibility with Windows 98SE, ME, 2000, XP, and Vista, along with Linux and Mac OS X.
Since this is an older device, the official Digicom website is no longer active. However, reliable driver sources can still be found online. The most authoritative source for legacy Digicom drivers is the Italian hardware forum HWUpgrade, which has archived the original download link:
Legacy 802.11g devices do not support modern WPA3 security protocols. Ensure your wireless router has WPA2/WPA mixed mode enabled, or the adapter will fail to authenticate with your network. Share public link Digicom 6d1320 Usb Wave 54 Driver Download
Leo took a deep breath. He realized he had been searching too broadly. He was looking for the product name, but he needed the specific hardware identity.
Understanding your hardware helps you choose the correct driver package. Digicom USB Wave 54 Model Number: 6D1320 Interface: USB 2.0 / USB 1.1 Wireless Standard: 802.11g (54 Mbps) / 802.11b (11 Mbps)
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | USB power management or wrong chipset variant. | Disable USB selective suspend in Power Options. Try a different USB port (USB 2.0 preferred). | | Code 39 (Corrupt driver) | Windows Update overwrote the driver. | Uninstall device (delete driver software). Reinstall via the .inf method above. | | Device works but no networks found | Driver is for a different regulatory domain. | Open Device Manager > Properties > Advanced tab > Change "Country Region" to your location. | | Constant disconnections | 802.11n mixed mode interference. | Force your router to "802.11g only" or "54g" mode. Disable 802.11n on the adapter properties. | Check and select Windows XP (Service Pack 3)
Yes, with compromises. Long answer: The Digicom 6d1320 was released 15+ years before Windows 11. While you can force the Ralink RT73 driver to install, you will face three limitations:
Plug in the Digicom USB Wave 54 adapter only when prompted by the software, or immediately after the installation finishes.
Supports 64, 128, and 256-bit WEP, as well as WPA, TKIP, and AES protocols. Authentication: Includes support for the 802.1x protocol. The most authoritative source for legacy Digicom drivers
After installation, the device should appear as "Ralink 802.11g Wireless Adapter" or "Digicom Wave 54."
Alternatives if drivers are unavailable If a suitable driver cannot be found or the adapter is incompatible: