Convert to Mobility Express using the ap-type mobility-express command:
As of 2024, the 8.5 train is considered "End of Software Maintenance." While stable for legacy deployments, administrators should note that Cisco generally recommends moving to the 8.10 MR8 or MR9 releases for the latest security patches and feature sets (such as WPA3 and Fast Transition
: Once it reboots, it will broadcast a "CiscoAirProvision" SSID, allowing you to configure the virtual controller via a web browser. 4. Troubleshooting Common Issues Air-ap2800-k9-me-8-5-182-0.tar
You can deploy this software via the Command Line Interface using a TFTP or HTTP server. Step 1: Prepare the Environment
| Issue | Solution | |-------|----------| | AP boots as CAPWAP, not ME | ap-type mobility-express tftp://... | | TAR extraction fails | Verify checksum; increase TFTP timeout | | Web UI inaccessible | Factory reset: hold Mode button while powering up for 20s | | Subordinate APs not joining | Check ME license count (default 25 in 8.5) | Step 1: Prepare the Environment | Issue |
If multiple APs in the deployment run Mobility Express, designate one as the master controller. If the master fails, ME automatically elects a new master from the remaining ME-capable APs, ensuring network continuity.
Log into the AP using your admin credentials. Execute the type-conversion command from the privileged exec prompt: Log into the AP using your admin credentials
(typically controller-based) gains the ability to operate as a standalone controller/AP unit. Do you need the specific CLI commands to perform the conversion using this image?
No products in the cart.