Unplug the phone, remove the battery for a few seconds, reinsert it, and turn on your phone. Note: The first boot may take a few minutes. Conclusion
Disconnect the USB cable, pull out the battery, re-insert it, and press the power button.
Install the correct SPD USB Drivers on your PC so it can communicate with the phone.
Standard Spreadtrum/SPD USB drivers are necessary for the computer to recognize the device in "Flash Mode". Flashing Procedure Summary Nokia 105 Ta 1304 Flash File Download
Before you start, gather your toolkit. You can find these at various mobile repair resource sites:
Press and hold the Boot Key (usually the Center Button or Volume Up/Down button) and plug in the USB cable. The tool should detect the phone and start flashing.
Extract the package into a dedicated folder on your desktop. Unplug the phone, remove the battery for a
Flashing the stock ROM becomes necessary when standard troubleshooting methods, like hard resetting, fail to work. Installing a fresh flash file resolves several critical system errors:
Power off your Nokia 105 completely. Remove the battery for 5 seconds, then reinsert it (do not power the phone on).
Extract your chosen Flash Tool (e.g., Miracle Box or SPD Upgrade Tool) into its own folder. Step 3: Configure the Flash Tool Install the correct SPD USB Drivers on your
: Resolves instances where the phone gets stuck on the Nokia logo.
Understanding the hardware configuration of your device ensures you use the correct firmware and tools during the flashing process. Nokia 105 (2021) Model Number: TA-1304 Processor (Chipset): Unisoc (SPD/Spreadtrum) Connectivity: Dual SIM, 2G GSM File Type: Scatter/Pac file inside a zip archive Why You Need the Nokia 105 TA-1304 Flash File
